Heating or Cooling Problems?

HEATING

  1. Air filter dirty?
  2. Check circuit breakers? ON?
  3. Switch ON? Usually on side of furnace
  4. Thermostat switch to HEAT? Batteries OK?
  5. PVC pipes that go outside clear? Snow covered?
  6. Drain hose from furnace to floor drain clear?


These simple checks can make your unit turn on. If all above steps are ok, you can try turning off power to furnace, wait 2 minutes, then reapply power to unit. If these steps did not solve it, you may have a failed part. Please call us for service.

920-541-3636

COOLING

  1. Air filter dirty?
  2. Check circuit breakers? ON?
  3. Switch ON?
  4. Thermostat switch to COOL? Batteries OK?
  5. Debris cleared from outdoor AC?
  6. Drain hose from indoor coil to floor drain clear?


These simple checks can make your unit turn on. If all above steps are ok, you can try turning off power to furnace, wait 2 minutes, then reapply power to unit. If these steps did not solve it, you may have a failed part. Please call us for service.

920-541-3636